|
SIGHTPICTURE
|
|
|
|
** USE THE BEST **
FEATURES: • Precision accuracy • Reliable and durable • Wide field of view • Quick target acquisition • Single reticle - dot • Dot density automatically controlled by surrounding light sensor • Parallax corrected • Unlimited eye relief • Built-in Weaver mount • Lightweight, waterproof and shockproof • Low power usage for long battery life • Black matte finish
TECHNICAL SPECIFICATIONS Power (x) 1 Operation remove protective cap Objective aperture (mm) 23x16 Field of view (m @ 100m) 15.7 Power supply (1) CR2032 battery Elevation adjustment range (m @ 100m) 5 Windage adjustment range (m @ 100m) 4 Set value for one scale division 1 div = approx 1 MOA Dot size (MOA) 4 Construction aircraft aluminum Length (in) 3.2 Weight (oz) 4 Recoil withstanding (G’s) up to 1000 ZEROING With the sight securely mounted, rest the gun on a solid
support and aim at a target 50 to 100 yards (or meters) away. All test shots should be done under the same
conditions to achieve maximum accuracy – this includes using the same rest and same cartridge type. Fire a
test group to see where the gun is shooting. Adjust the reticle accordingly by changing the elevation &
windage adjustments until the reticle is zeroed on the bullet’s point of impact. (Note - each click adjustment
moves the point of impact by 1 MOA; approximately 1” at 100 yds, ½” at 50 yds). Adjust the elevation first,
then tighten the locking screw using the small allen wrench that is included. Then adjust the windage. BATTERY INSTALLATION The Mini Shot is powered by one 3V Lithium battery (CR2032 or
equivalent). Should the reticle grow dim or not illuminate, the battery needs to be replaced. To
install a new battery, use the included allen wrench to loosen the two screws located between the lens segment and
elevation screw, and remove the top half of the unit from its base. Insert the battery with the - side
up, place the top of the unit back on the base and re-tighten the screws. MOUNTING Check to make sure that all included items are present. The
Mini Shot sight includes an integrated rail that fits standard Weaver and dovetailed bases, which are suitable
for most applications. Set the rail onto the base so that the rail claw aligns with the crosscut grooves
and work the claw into the base until the cross-bolt seats into the groove. Securely tighten the locking screw. INCLUDES: • (2) Hexagon screws • (1) CR2032 lithium battery • Allen wrench • Rubber dust cap • Screwdriver • Scale dial • Lens cleaning cloth • Limited Lifetime Warranty card |
|
